Tsaftacewa da Kulawa da Matsalolin Ruwan Mai

Fruwa ruwa Tsaftacewa tace kashi da hanyar kulawa:

Idan ba a daɗe da amfani da ita ba, sai a tsaftace tacewa, a cire kayan tacewa, a wanke a bushe, a rufe a cikin jakar filastik a adana ba tare da gurɓata ba, sannan a goge matatar a adana ba tare da lalacewa ba.

Mai maye gurbinruwan mai Ya kamata a nutsar da nau'in tacewar rabuwa a cikin ruwan wanka na acid-base, lokacin jiƙa bai kamata ya wuce sa'o'i 24 ba, kuma yawan zafin jiki na ruwan acid-base gabaɗaya 25℃-50℃.Ana ba da shawarar cewa rabon acid ko alkali zuwa ruwa shine 10-20%.

Abubuwan tacewa da tacewa tare da babban abun ciki mai gina jiki suna jiƙa a cikin maganin enzyme, aikin tsaftacewa yana da kyau, kuma an sabunta su kafin amfani.Dole ne a tsaftace su sannan a haifuwa da tururi.Tsaftacewa da ƙwanƙwasa suna da matukar mahimmanci ga masu tace ruwa da kuma bushewar tacewa.

Lokacin sterilizing daruwan mai rabuwa tace kashi, kula da lokaci da zazzabi.Polypropylene ya kamata a haifuwa a 121°C a cikin babban ma'aunin haifuwa mai zafin jiki, kuma haifuwa da tururi a matsa lamba na 0.1MPa a 130°C/20 min.Polysulfone da PTFE Ethylene suna haifuwa ta tururi, wanda zai iya kaiwa 142°C da matsa lamba na 0.2MPa.Lokacin da ya dace shine kusan mintuna 30.Idan yanayin zafi ya yi yawa, lokacin ya yi tsayi, kuma matsa lamba ya yi yawa, abin tacewa zai lalace.

Ana kama ɗigon mai, ruwa, da sauran ruwaye ta hanyar microfibers a cikin coalescer, kuma waɗannan nau'ikan fibers masu girma da yawa suna samar da tashoshi mai raɗaɗi don iskar iska, suna tilasta ƙaƙƙarfan barbashi da ɗigon ruwa a cikin rikice-rikicen inertial, tsaka-tsakin tsaka-tsaki, da tsangwama kai tsaye.Karkashin aikin na'urar tacewa, filaye masu kyau suna kama shi, kuma tashin hankalin saman ruwan yana haifar da ɗigon ɗigon ruwa don haɗuwa cikin manyan ɗigon ruwa.Saboda aikin nauyi, manyan ɗigon ruwa suna sauka zuwa kasan akwati.